Corima R45 Carbon Wheels

Description

Our new 45R tubeless wheels in TC (tubeless hook) version feature an internal width of 22 mm and an external width of 30 mm, allowing for tires ranging from 25 to 34 mm. Optimized for 28 to 30 mm tires, they ensure unmatched performance and stability.

These disc brake wheels are laced with black SAPIM spokes and mounted with anthracite grey CORIMA hubs (hub with ratchets).

The 45R wheels have a sleek and aesthetic design, with the rim finish done in mat varnish that reveals the 3K carbon fibers and the mat black decals are placed under the varnish.

Specifications

Data

ETRTO 622 x 22TC (28") tubeless hooked pair
Shimano HG 11/12 speed
Profile : 45MM
Rim width : 30mm
Weight front : 640 g
Weight rear : 755 g
Carbon weave : Mat 3k
Front Black Bent Spokes : 20
Rear Black Bent Spokes : 20

Shipped with

Rim tape
Protection wheelbag
Spoke wrench
Valve TLR
Valve nut tool

User's manual

For the 8/9/10 speed Shimano and SRAM 10 speed cassettes, a 1.85 mm spacer is required (not supplied by CORIMA).

The 11 speed SRAM cassettes with separated cogs are compatible on this cassette body.

Mandatory conditions of use for road tubeless wheels

Tires compatibility

22TC (tubeless crochet) wheels can be fitted with 25 to 34 mm tires (ISO 5775).
In tubeless setup, the use of Tubeless Ready tires is mandatory.
With inner tube, any type of tire is allowed (TubeType or Tubeless Ready tire).
The maximum inflation pressure is 7.5 bar (109 psi) for a 25 mm tire or 6.7 bar (97 psi) for a 28 mm.

Tips and restrictions

Running tubeless tires requires specific care when it comes to installation and maintenance.

When installing the tire, 2 layers of 0.1mm thick rim tape must be installed against the inner rim bed to ensure an airtight seal. (FTUB27-10 from Velox)
When inflating, 12g CO2 cartridges limited to 6bar are allowed.
CO2 cartridges higher than 12g, high flow pumps and compressors are prohibited.
Use only plastic tire levers.

Corima